- Banana socket outputs for connection to 3-phase installation tester.
- Voltage indicators on EVSE output.
- Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
- Control Pilot resistance selector for simulation of electric vehicle status.
- Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
- Type 2 Male Plug connector for connection to EVSE.
- 6 mA EV RCD support.
- Functional tests support*.
- EVSE AUTO SEQUENCE® support*.
- MESM report creation**.
- Basic support:
- A 1532
- Partial support:
- 6 mA EV RCD
- EVSE report**
- Full support:
- Functional test support
- EVSE AUTO SEQUENCE® support
* Functional tests and AUTO SEQUENCE® are supported only on the MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers.
** Report printing is only available via the MESM PC SW. The MESM license (P 1101) is to be purchased separately.
- On-site testing of EVSE charging station installation.
- Initial and periodic testing of private, semi-private and public EVSE charging stations.
Dimensions (w x h x l): 200 x 100 x 70 mm
Mass (without accessories): 0.82 kg