Our metrology technicians can perform calibrations using the manufacturer's procedures and recommended standards. We also have the capability to adjust measuring equipment made by the manufacturers. We can provide both commercial-level calibrations and we can offer DKD accredited calibrations to EN ISO/IEC 17025 as well.
Metrel’s calibration system has been accredited to ISO/IEC 17025
by Slovenian Accreditation No.: LK-011.
Calibrations performed in the facility
- Installation testers – Eurotest, Instaltest, Insulation test, etc.
- Safety appliance testers – CE Multitester, MultiServicer, PAT, etc.
- Test equipment – Multimeters, Clampmeters, Resistors, Time interval meters, etc.
- Test equipment for environmental conditions - Poly, FonS, Multinorm, etc.
All calibration procedures are written and insuring reliability and repeatability of measurements.
Please contact us with any questions concerning calibration. Click here.
For measuring equipment of Metrel the services include adjustment.
Shipment address:
Metrel DUS d.d.
Ljubljanska c. 77
SI-1354 Horjul
SLOVENIA
Metrel’s Calibration Laboratory
Phone: 00-3861-7558-385; Fax: 00-3861-7549-095
Please click here or fax your requirements for a quote. Turnaround on calibration is typically 2-5 working days.
Accredited Calibration
DC Voltage | 1 mV to 5 kV |
|
AC Voltage | 10 mV to 6 kV | 20 Hz to 100 kHz |
DC Current | 15 μA to 10 A |
|
AC Current | 1 μA to 1100 A | 10 Hz do 30 kHz |
DC Resistance | 1 mΩ to 6 TΩ |
|
AC Resistance | 0,4 mΩ to 1 MΩ | DC to 500 Hz |
Loop impedance | 70 mΩ to 1 kΩ | 50 Hz |
Frequency | 0,1 Hz to 100 MHz |
|
Time interval | 1 μs to 100 000 s |
|
NOT Accredited Calibration
Temperature | -50 °C to 150 °C |
|
Air humidity | 10 % to 95 % | 23 °C ± 5 °C |
Illuminance | 20 lux to 2200 lux |
|
Velocity | 0,2 m/s to 10 m/s | 23 °C ± 5 °C |
Sound level | 94 dB to 114 dB | 31,5 Hz to 16 kHz |



