MI 2088 Standard set
Sets
- MI 2088 ST
- Instrument Earth-Insulation Tester
- Test lead, 2 x 1,5 m
- Soft carrying bag
- RS232 cable
- Test probe, 2 pcs (red, black)
- Crocodil clip
- PC Software EarthLink
- Instruction manual
- Handbook on CD
- Calibration certificate
Do you own this product?
Optional accessories
A 1018 Current clamp (low range, leakage)
High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 1.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.
A 1019 Current clamp
Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.
A 1202 Additional extension part for A 1201
Additional extension part for Insulated rod for CONTINUITY measurement A 1201.
A 1201 Insulated rod for CONTINUITY measurement
Insulated rod enables insulation resistance and continuity measurement on hard-to-reach objects, e.g. luminaries.
A 1074 Mini current clamp 200 A / 0.2 A
Mini current clamp 200 A / 0.2 A with jaw opening 15 mm for current measurement in confined spaces.
A 1169 Fast charger for AA, C, D and 9 V block batteries
Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.
A 1014 Test probe, black
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1013 Crocodile clip, black
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
S 2012 Continuity test lead, 10 m, 2 pcs (red, black)
2 pieces of extension test lead for continuity measurements.
A 1171 RS232 / USB adapter with 1 m cable
RS232 / USB adapter for instruments without USB comunication port.
S 2002 Earth test set, 4-wire, 50 m
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 4 x 1 m; test lead, 50 m, 2 pcs; test lead, 4 m, 2 pcs; test lead, 1 m, 2 pcs; earth spikes, 4 pcs; carrying bag.
S 2001 Earth test set, 4-wire, 20 m
Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 4 x 1 m; test lead, 20 m, 2 pcs; test lead, 4 m, 2 pcs; earth spikes, 4 pcs; soft carrying bag.
A 1006 Soft carrying bag
Large soft carrying bag for transport and storage of test instrument and belonging accessories.
Technical data
- Dimensions: 200 x 250 x 240 mm
A 1016 Test probe, red
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
