NEW product: A 1740 Calibration box 5 kV
|
|
We have launched a new accessory: A 1740 Calibration box 5 kV, designed for occasional verification (calibration) of insulation resistance testers/meters. It houses 4 high-quality resistors (10MΩ/100MΩ/1GΩ/10GΩ) connected to 5 terminal stubs (one common terminal and 4 for each separate resistor) that are spaced far apart to accommodate easy connection to the tester.
|
|
The A 1740 Calibration box 5 kV can be used for calibration of the following Metrel products:
- MI 3210 TeraOhm XA 10kV
- MI 3205 TeraOhmXA 5kV
- MI 3202 GigaOhm 5 kV
- MI 3201 TeraOhm 5 kV Plus
- MI 2077 TeraOhm 5 kV
- MI 3121 SMARTEC Insulation Continuity
- MI 3121H SMARTEC 2,5 kV Insulation Continuity
- MI 3155 EurotestXD
- MI 3152 EurotestXC
- MI 3152H EurotestXC 2,5 kV
- MI 3102 BT EurotestXE
- MI 3100 SE EurotestEASI
- MI 3125 BT EurotestCOMBO
- MI 3325 MultiServicerXD
- MI 3394 EU CE MultiTesterXA
|
|
In addition to its use for calibration of insulation resistance testers/meters, the A 1740 Calibration box 5 kV is also suitable for simulation of resistance of wires, cables and insulators, provided the connected voltage doesn’t exceed 5 kV.
|
|
Metrel d.d.
| Ljubljanska c. 77 | | SI-1354 Horjul | | Slovenia |
|
|
|
|
