MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. It is fully compliant with functionality standards (e.g. IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. Besides those, the instrument supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.
{ru:Kateri je najbolj primeren za Vas?}
Список применяемых стандартов
Монтаж низковольтного оборудования в здании
- EISinsp Competences: Low Voltage Electrical Installation Safety Inspection
- EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers
- IEC/EN 60364 Electrical Installations for Buildings series
- IEC/EN 60364-6 Electrical Installations for Buildings - Verification
- IEC/EN 60364-4-41 Electrical Installations for Buildings - Protection against electric shock
- IEC/EN 60755 General safety requirements for residual current operated protective devices
- IEC/EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- IEC/EN 61009 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)
- IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
- IEC/EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
- IEC/EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
- IEC/EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
- IEC/EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
- IEC/EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
- IEC/EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring and monitoring of protective measures
- IEC/EN 61557-11 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems
- IEC/EN 60364-7 Electrical Installations for Buildings - Requirements for special installations or locations
- VDE 0413 (IEC 61557) Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
- AS / NZ 3017 Electrical installations – Verification guidelines
- AS / NZ 3018 Electrical installations - Domestic installations
- BS 7671 IEE Wiring Regulations (18th edition)
- CEI 64.8 V4 rated electrical equipment not exceeding 1,000 VAC and 1,500V DC current
Система заземления и молниезащиты
- LPSinsp Competences: Lightning Protection of Buildings Inspection
- LPSc Competences: Lightning Protection of Buildings for Contractors and Maintainers
- IEC 62305 Protection against lightning - series
- IEC/EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
- IEC/EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
Электроэнергетика
- EEA Competences: Electrical Energetic Installations with Automatic Trip-Out Ability
- IEC/EN 60909-0 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
- IEC / EN 60947-2 Low-voltage switchgear and controlgear – Part 2: Circuit-breakers
Заземление и "земля"
- EES Competences: Electrical Energetic Systems Earthing and Grounding Safety
- HD 637 S1 Power installations exceeding 1 kV a.c.
- IEEE Guide for Safety in AC Substation Grounding
- IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
- IEEE 142 Recommended Practice for Grounding of Industrial and Commercial Power Systems
- IEEE 367-2012 - IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
- EN 50522 Earthing of power installations exceeding 1 000 V a.c.
- RAT 2008 Spanish high-voltage regulation
Качество электроэнергии
- PQA Competences: Power Quality Analyzing & Reporting
- IEC/EN 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
Безопасность электрических щитов
- ESB Competences: Electrical Switchboards Safety Testing
- IEC/EN 62271 High-voltage switchgear and controlgear - series
- IEC/EN 62271-1 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
- IEC/EN 62271-100 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers
Безопасность машины
- MST Competences: Machines Electrical Safety Testing
- IEC/EN 50191 Erection and operation of electrical test equipment
- IEC/EN 61557-14 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
Электробезопасность передвижных устройств
- eMOB Competences: Electrical LV Installations in Mobile Units Safety
- IEC/EN/HD 60364-7-717 Low-voltage electrical installations: Requirements for special installations or locations – Supplies for Electrical Vehicles
- ISO 6469-3 - Electrically propelled road vehicles Safety specification Part 3: Electrical safety
Источники питания электротранспорта
- EVSE Competences: Electrical Vehicle Supply Equipment Safety
- IEC/EN 61851 Electric vehicle conductive charging system
- IEC/EN 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
Медицинское электрооборудование
- AS/NZS 3551 Management programs for medical devices
Оборудование медицинских и хирургических кабинетов
- MEDi Competences: Medical and Surgery Rooms Electrical Installations Safety
Безопасность прибора для пользователя
- IEC 61000-6-4:2015 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- Директива EMC 89/336/EE по электромагнитной совместимости
- IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series
- IEC/EN 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage
ЭМС безопасность
- IEC/EN 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements - series
Применения
Производство электроэнергии
- Earthing and lightning protection in thermal energy power plants
Возобновляемые источники энергии
- Generator stator testing
- Lightning protection testing in wind plants
- Fall of potential method for solar and wind stations
- Two clamps method for measuring earth loops in a solar plant
Распределение мощности
- Step and touch voltages of transformers
- Insulation of long cables
- Transformers ratio, winding resistances, tab changer and connections
Industrial installations
- Remote antenna tower earthing resistance
- Impedance of live transformer and fault currents with hot factor
- Методы измерения удельного сопротивления заземления
- Реле утечки на землю и токов короткого замыкания
Безопасность при монтаже низковольтного оборудования
- Электробезопасность подстанции
- Электрическое соединение и напряжение прикосновения во время отказа
- Распределительные щиты и автоматические устройства защитного отключения
- Электробезопасность в общественных местах
Заземление низковольтных установок и молниезащита
- Измерение заземления методом падения напряжения
- Метод с двумя зажимами для измерения молниезащиты и защиты от КЗ на землю
- Устройства защиты от перенапряжений
Качество низковольтного напряжения
- Влияние проблем с качеством электроэнергии на жилую и рабочую среду
Особые места
- Влажные и открытые места
- Информационная система
- Установки постоянного тока
- Производство и испытание источников питания электротранспорта
e-Mobility
- EVSE domestic installation testing
- EVSE periodic inspection
- Renewable power and car charging
Mobile installations
- Vehicles with an on-board generator
- Road maintenance and construction
- Emergency response vehicles
- Telecommunication equipment in mobile installations
Заземление и молниезащита больницы
- Метод с двумя зажимами для измерения молниезащиты и защиты от КЗ на землю
- Измерение заземления в больнице методом падения напряжения
- Электрическое соединение и напряжение прикосновения во время возникновения тока КЗ
- Устройства защиты от перенапряжения в больницах
Электропитание и распределение мощности
- Распределительные щиты больницы и автоматические устройства защитного отключения
Хирургические кабинеты или операционные
- Медицинская ИТ-система
- Изолированные участки УЗО
Послеоперационные и больничные палаты
- Электробезопасность общественных и рабочих мест в здравоохранении
- Электробезопасность во влажных зонах больниц
Secondary power sources in healthcare
- Безопасность генератора
- Кареты скорой помощи
- Полевой госпиталь
{ru:Specifikacije}
{ru:Programska oprema}
{ru:Kje kupiti?}
{ru:Poišči distributerje in partnerje v bližini}
{ru:Imate vprašanje?}
{ru:Kontaktirajte specialista}