MI 3100 SE EurotestEASI

Večfunkcijski testerji

Instrument MI 3100 SE EurotestEASI je hitra, natančna in enostavna večfunkcijska merilna naprava za izvedbo celotnega nabora inštalacijskih varnostnih testov v skladu s standardom IEC/EN 61557. Poleg tega omogoča stalen prikaz napetosti, ugotavljanje faznih zaporedij in merjenje zemeljske upornosti ter je opremljen z integriranimi karakteristikami varovalk in zaščitnih stikal na diferenčni tok (RCD) za DOBER / SLAB vrednotenje testnih rezultatov. Vsi rezultati se lahko hitro shranijo in pregledajo na instrumentu ter potem prenesejo preko EuroLink PRO programa (vključenega v standardnem setu) na računalnik za vrednotenje in izdelavo poročila po testiranju.

Seti

MI 3100 SE Standardni set

  • Inštrument MI 3100 SE EurotestEASI
  • Merilni šuko kabel, 1.5 m
  • Univerzalni merilni kabel, 3 kosi, 1.5 m
  • Tipalka, 3 kosi (črna, modra, zelena)
  • Krokodil, 3 kosi (črna, modra, zelena)
  • Omrežni kabel in 6 NiMH akumulatorskih baterij AA
  • RS232 – PS/2 kabel
  • USB kabel
  • Trak za nošenje
  • Torba
  • PC Software EuroLink PRO programska oprema
  • Navodilo za uporabo – kratko
  • Navodilo za uporabo na CD
  • Priročnik na CD
  • Akreditiran certifikat o kalibraciji
V košarico
€ 1.204,51
Opcijski pribor

Podprti standardi

Building LV Installation

  • EISinsp Competences: Low Voltage Electrical Installation Safety Inspection
  • EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers
  • IEC/EN 60364 Electrical Installations for Buildings series
  • IEC/EN 60364-6 Electrical Installations for Buildings - Verification
  • IEC/EN 60364-4-41 Electrical Installations for Buildings - Protection against electric shock
  • IEC/EN 60755 General safety requirements for residual current operated protective devices
  • IEC/EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
  • IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
  • IEC/EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
  • IEC/EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
  • IEC/EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
  • IEC/EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
  • IEC/EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
  • IEC/EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring and monitoring of protective measures
  • VDE 0413 (IEC 61557) Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
  • AS / NZ 3017 Electrical installations – Verification guidelines
  • BS 7671 IEE Wiring Regulations (18th edition)
  • CEI 64.8 V4 rated electrical equipment not exceeding 1,000 VAC and 1,500V DC current

Earthing and lightning protection 

  • LPSinsp Competences: Lightning Protection of Buildings Inspection
  • LPSc Competences: Lightning Protection of Buildings for Contractors and Maintainers
  • IEC 62305 Protection against lightning - series
  • IEC/EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
  • IEC/EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

Instrument safety towards user

  • IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series
  • IEC/EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

EMC safety

  • IEC/EN 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements - series
  • IEC/EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Lastnosti

Merilne funkcije

  • Merjenje DC izolacijske upornosti od 50 V do 1000 V.
  • PE preizkus zveznosti vodnika, izenačitev potenciala, 200 mA.
  • PE preizkus zveznosti vodnika s 7 mA tokom z možnostjo blokade odklopa.
  • Impedanca kratkostične in okvarne zanke.
  • Ugotavljanje zaporedja faz v trifaznih sistemih.
  • Preizkus zaščitnih stikal na diferenčni tok.
  • Merjenje ozemljitvene upornosti po 3-vodni metodi.

Ostale lastnosti

  • Prednastavljene mini AUTOSEQUENCE® meritve:
    - Auto TT (U, Zln, Zs, Uc).
    - Auto TN/RCD (U, Zln, Zs, Rpe).
    - Auto TN (U, Zln, Zlpe, Rpe).
  • Vgrajeni meniji za pomoč.
  • Baza karakteristik varovalk za hitro ovrednotenje merilnih rezultatov pri merjenju impedance kratkostične in okvarne zanke.
  • Stalen prikaz vrednosti napetosti za L-L, L-N in L-PE na zaslonu.
  • Hitra, zanesljiva in točna meritev impedance okvarne zanke z možnostjo blokade odklopa.
  • Vgrajen polnilnik in komplet akumulatorskih baterij, vključenih v „standard set“.
  • Samodejni preizkus zaščitnih stikal na diferenčni tok (RCD).
  • Bluetooth komunikacija s osebnimi računalniki, Android tablicami in pametnimi telefoni preko Bluetooth dongla.

Programska oprema

  • PC SW EuroLink PRO programska oprema za snemanje rezultatov meritev in izdelavo poročila.
  • EuroLink Android APP aplikacija za upravljanje podatkov (opcijsko).

Tehnični podatki

  • Dimenzije (š x v x d): 230 x 103 x 115 mm
  • Teža (brez pribora): 1.3 kg

Specifikacije


Natisni

Prenosi

Vrsta Ime datoteke Jezik Verzija Datum Zapiski Datoteka Velikost Online Prenos
Datasheet PC SW EuroLink PRO en 1.0 13.03.2014 pdf 915.07 KB
Datasheet MI 3100 SE EurotestEASI sl 2020 05.05.2020 pdf 618.58 KB
Manual MI 3100 SE EurotestEASI sl 1.3.4 11.10.2022 20 752 438 pdf 2.34 MB Prijava
Manual Fuse tables guide en 1.11.1 20.01.2023 pdf 350.79 KB Prijava
DoC EU Declaration of Conformity Multi-Language 10.08.2021 QR code Zunanja povezava Neznano
PC Software SW 0101 EuroLink PRO (EU) en 4.38 18.01.2022 Readme zip 60.59 MB Prijava
Android SW 1304 aMESM Android en 04.01.2021 QR code Zunanja povezava Neznano
USB driver USB driver Multi-Language 2.06.00 10.12.2018 Readme zip 2.99 MB Prijava