MD 9016 Electrical Field Service Multimeter
Ostali instrumenti / adapterji / pribor
MD 9016 digitalni multimeter je popolna kombinacija velikosti, inovativnih funkcij za ugotavljanja večine električnih in elektrotehničnih problemov, ter vgrajene zmožnosti komuniciranja s osebnim računalnikom. Po zaslugi zaslona z velikimi, dobrimi berljivimi znaki in enoročnega upravljanja je MD 9016 tudi izredno enostaven za uporabo. Kompakten inštrument, ki združuje visoko raven funkcionalnosti in majhno velikost ter prenosnost.
Kateri je najbolj primeren za Vas?
Izberite set
- MD 9016 multimeter z gumijastim tokom
- 2 merilni vezi
- Senzor tipa K
- 2 bateriji 1.5 V tipa AAA
- Navodila za uporabo
- Garancijski list
€ 132,98
Podprti standardi
Inštalacije v operacijskih sobah
- IEC/EN 60364-7-710 Requirements for special installations or locations – Medical Location
Varnost instrumenta proti uporabniku
- EN 55032 Elektromagnetna združljivost večpredstavnostne opreme - Zahteve glede elektromagnetnega sevanja
- IEC 61000-2-12 Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
- IEC/EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2 - Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
- IEC/EN 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3 - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
- IEC/EN 61000-4-2 Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
- IEC/EN 61000-4-3 Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
- IEC/EN 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
- IEC/EN 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
- IEC/EN 61000-4-7 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- IEC/EN 61000-4-8 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
- IEC 61000-6-5:2015 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
- The Low Voltage Directive LVD 73/23/EEC Electrical equipment designed for use within certain voltage limits
- Directive EMC 89/336/EE on electromagnetic compatibility
- IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series
- IEC/EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
- IEC/EN 61010-031 Amendment 1 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement
- IEC/EN 61010-2-032 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
- IEC/EN 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage
EMC varnost
- IEC/EN 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements - series
Lastnosti
Merilne funkcije
- Merjenje enosmerne in izmenične napetosti
- Merjenje enosmernega in izmeničnega toka
- Merjenje kapacitivnosti
- Merjenje upornosti
- Preizkušanje diod
- Merjenje omrežne frekvence
- Preizkušanje povezav
- Zaznavanje napetosti in elektromagnetnega polja brez dotika
- Merjenje temperature
Tehnični podatki
- dimenzije (š x v x d): 80 x 50 x 161 mm
- teža (brez pribora): 340 g
Rešitve
Preventivno vzdrževanje
- Meritve napetosti
- Meritve toka
- Meritve frekvence
Iskanje napak
- Iskanje napak v aparatih
- Delo na terenu
- Elektronika
- HVAC
Splošna uporaba
- Vzdrževanje doma
- Hobi aktivnosti
Specifikacije
Prenosi
| Datasheet | Jezik | Verzija | Datum | Zapiski | Datoteka | Velikost | Prenos |
|---|---|---|---|---|---|---|---|
| MD 9016 Digitalni multimeter | sl | 2019 | 14.11.2019 | 303.25 KB |
|
| DoC | Jezik | Verzija | Datum | Zapiski | Datoteka | Velikost | Prenos |
|---|---|---|---|---|---|---|---|
| EU Declaration of Conformity | Multi-Language | 06.07.2023 | QR code | Zunanja povezava | Neznano |
|
| PC Software | Jezik | Verzija | Datum | Zapiski | Datoteka | Velikost | Prenos |
|---|---|---|---|---|---|---|---|
| SW 1310 Data Recording | Multi-Language | 1.1.1 | 23.03.2021 | zip | 4.98 MB |
Prijava
|
| USB driver | Jezik | Verzija | Datum | Zapiski | Datoteka | Velikost | Prenos |
|---|---|---|---|---|---|---|---|
| USB driver (DMM) | en | 1.1.1 | 23.03.2021 | zip | 13.62 MB |
Prijava
|
Kje kupiti?
Poišči distributerje in partnerje v bližini
Imate vprašanje?
Kontaktirajte specialista
