MI 3105 Standard set
Sets
- Instrument EurotestXA
- Plug commander, 1.5 m
- Test lead, 3 x 1.5 m
- Power supply adapter + 6 NiMH rechargeable batteries, type AA
- Test probe, 3 pcs (blue, black, green)
- Crocodile clip, 3 pcs (blue, black, green)
- RS232 - PS/2 cable
- USB cable
- Soft carrying bag
- Soft carrying neck belt
- PC Software EuroLink PRO
- Short instruction manual
- Instruction manual on CD
- Handbook on CD
- Calibration certificate
Compare this product with others in Product Finder
Optional accessories
A 1018 Current clamp (low range, leakage)
High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 1.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.
S 2026 Earth test set, 3-wire, 20 m
Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 20 m, 2 pcs; test lead, 4.5 m; earth spikes, 2 pcs; soft carrying bag.
S 2027 Earth test set, 3-wire, 50 m
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead, 4.5 m; test lead, 1 m, 2 pcs; earth spikes, 2 pcs; soft carrying bag.
S 2080 1,2 V, 2500 mAh AA rechargeable batteries type AA, 6 pcs
A set of 6 pieces of rechargeable batteries type AA.
A 1019 Current clamp
Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.
A 1172 Luxmeter sensor, type B (PS/2)
Luxmeter sensor, type B, for high-accuracy illuminance measurement e.g. for emergency lightning inspection.
A 1173 Luxmeter sensor, type C (PS/2)
Illuminance probe for light conditions measurements with 0,1Lux resolution.
A 1160 Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA
Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.
A 1199 Ro-adapter
Ro-adapter is intended for performing earth resistance measurement in combination with installation safety tester.
A 1191 Receiver R10K
Receiver R10K is used for wire tracing, fuse identification and fault finding in low voltage electrical installations.
A 1074 Mini current clamp 200 A / 0.2 A
Mini current clamp 200 A / 0.2 A with jaw opening 15 mm for current measurement in confined spaces.
A 1192 Selective probe for R10K
Very sensitive inductive sensor serves for contactless fuse and cable finding. To be used with A 1191.
A 1169 Fast charger for AA, C, D and 9 V block batteries
Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.
S 2058 Insulation test plates
Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-5-1).
A 1067 Test lead for R10K, 1.5 m, with built-in resistor
Test lead with probe enables fast and accurate fuse finding and current circuit allocation. To be used with A 1191.
A 1244 Tip commander, 2-wire (straight cable)
Single phase 2-wire commander with test tip, TEST and SAVE function keys for installation safety measurements.
A 1011 Test lead, 3 x 1.5 m
3-wire test lead for measurements on single or three phase electrical installations.
A 1256 Plug commander (straight cable)
Single phase schuko plug commander with TEST and MEM function keys for fast and simple measurements on one phase sockets.
A 1143 Euro Z 290 A
The A 1143 Euro Z 290 A is a professional portable high current impedance tester. It performs high precision line and high precision fault loop impedance measurements in environments up to CAT IV / 310 V.
Euro Z 290 A is the impedance tester which enables line / loop impedance measurements with an accuracy down to 0.1 mΩ.