MI 3123 Standard set

High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 1.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.

Password for upgrading standard PC software EuroLink PRO to advanced PC SW EuroLink PRO Plus with professional report creation facility.

A set of 6 pieces of rechargeable batteries type AA.

Adapter for fast battery charging.

Extension test lead.

Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.

Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.

Connection leads for different measurements.

Mini current clamp 200 A / 0.2 A with jaw opening 15 mm for current measurement in confined spaces.

Eurocheck is a professional multifunctional field calibrator intended for use with installation safety testers.

Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

 

Technical data

• Dimensions: 170 x 250 x 240 mm

Professional PC Software EuroLink PRO Plus enables downloading, data management and complete test report preparation. Delivered with RS232-PS/2 and USB communication cables.

PC Software EuroLink PRO enables downloading and test results management and printing of test reports. Delivered with RS232-PS/2 and USB communication cables.

Extension test lead for earth and continuity measurements.

Extension test lead for earth and continuity measurements.

Extension test lead for earth and continuity measurements.

Battery charger and a set of 6 pieces of rechargeable batteries, type AA.

Extension test lead for continuity measurements.

Small soft carrying bag for transport and storage of test instrument or accessories.

Soft hand strap for holding the instrument.

Set of 4 test leads is intended for two clamp earth resistance measurement to connect current clamps on the instrument.

Earth test set for earth resistance measurement on distance up to 50 m (for Smartec).

 

* The difference between S 2007 and S 2041 is in colours of the cables.
S 2007 is for old colouring scheme (H: blue, S: red, E: black, ES: green) and is compatible with MI 2124 and A 1199
S 2041 is for new colouring scheme (H: black, S: green, E: blue, ES: red) and is compatible with all EIS tester of 3xxx generation.

Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead 20 m, test lead 4 m; test lead, 1 m, 2 pcs; earth spikes, 4 pcs; soft carrying bag.

 

* The difference between S 2007 and S 2041 is in colours of the cables.
S 2007 is for old colouring scheme (H: blue, S: red, E: black, ES: green) and is compatible with MI 2124 and A 1199
S 2041 is for new colouring scheme (H: black, S: green, E: blue, ES: red) and is compatible with all EIS tester of 3xxx generation.

Case with foam inserts with slots for a Eurotest multifunctional electrical installation safety tester and MI 3309 BT DeltaGT. Multiple possible instrument & accessory combinations. We recommend the MI 3110 EurotestIT, MI 3309 DeltaPAT, MD 9231 AC/DC current clamp and A 1207 three phase adapter combination.

 

Technical data

• Dimensions: 590 x 470 x 270 mm
• Mass: 6.0 kg

The A 1778 magnetic probe (with a Ø6.6 mm right-angle magnetic adapter and a Ø4 mm socket) is designed for semi-temporary measurement of voltage on steel screw terminal blocks.

Wheels and trolley that can be added to carrying cases for easier transport.