MI 3209 TeraOhmLT 10kV

High voltage insulation testers

The MI 3209 TeraOhm LT 10kV is a portable insulation resistance tester for insulation testing with DC voltages of up to 10 kV. Boasting excellent IP protection (IP65) and being both mains and battery powered, it is at home in even the most demanding working environments.

Sets

MI 3209 Standard set

Instrument MI 3209 TeraOhmLT 10 kV
10 kV shielded test lead, 2 m, 2 pcs (black, red)
10 kV crocodile clip, 2 pcs (black, red)
Guard test lead, green, 2 m
Crocodile clip, green
Mains cable
Handbook “Guide to modern insulation testing” on storage media
Instruction manual on storage media
Calibration certificate

Add to enquiry

Optional accessories

Products

High voltage insulation testers

MI 3210 TeraOhm XA 10kV

MI 3209 TeraOhmLT 10kV

MI 3205 TeraOhmXA 5kV

MI 3201 TeraOhm 5 kV Plus

MI 3202 GigaOhm 5 kV

MI 3121H SMARTEC 2,5 kV Insulation Continuity

Compare products

Standards applied

Building LV Installation

IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
IEC/EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

Properties

Measuring functions

Insulation measurement;
Diagnostic test (PI, DAR, DD);
Step voltage test;
Withstanding voltage test (DC) up to 10 kV;
Voltage and frequency measurement up to 550 V TRMS.

Key features

Measurement range of insulation resistance up to 10 TΩ.
Adjustable test voltage in steps of 50 V
(50 V ... 1 kV) and 100 V (1 kV ... 10 kV).
Programmable timer.
Capacitance measurement.
Charging rate for capacitive load < 3 s / µF at 10 kV.
Automatic discharge of test object after completion of measurement.
Guard terminal.
High voltage breakdown detection.
Auto adjustment function.
Measurement results in numerical and graphical form.
PC software HVLink PRO for downloading and analysing of the test results and test report printing (optional).
Isolated RS-232 and USB communication ports.
High quality accessories including shielded test leads in standard set.
High EM interferences protection: input AC current noise rejection (1 mA∞600 V) and additional averaging of the result (5, 10, 30, 60).
CAT IV / 600 V.
Mains and rechargeable battery power supply.